Glossy Putty & Azure: A Travertine Kitchen
Glossy putty cabinetry, azure lacquer and a travertine island create an expressive kitchen organized around layered light and working clearances.

The design notes
What makes this room work.
Test every open position at full scale
Tape the island, occupied stools, dining chairs and primary route, then plot the refrigerator, dishwasher, ovens and pantry fully open. Protect landing space beside the sink and cooking surface. Shorten the island or use a freestanding table if the finished room cannot support comfortable working and passage clearances at the same time.
Approve travertine by slab and finish
Review the actual material upright and flat because banding, pores, fill and tone vary. Map waterfall direction, seams, cutouts, overhang support and backsplash outlets with the fabricator. Confirm sealing, acidic-spill and heat protection, cleaning guidance, floor capacity and the packaged route before fabrication.
Layer useful light before decorative light
Provide continuous concealed task light at the working wall before placing pendants. Mock up each globe at full size so it clears cabinet doors, sightlines and the tallest user, then confirm suspension, dimming and surface reflections. View glossy putty, azure, travertine, oak, nickel and leather together under both daylight and the final lamps.
Make it yours
Borrow the idea.
Keep sound cabinetry and paint only the pantry or island base azure in a durable cabinet finish. Use a glossy putty panel on one dry cabinet bank, add fluted smoked-oak veneer to the island face and introduce travertine with a small dining table or serving board rather than a full stone wrap. Black leather stools and white-glass pendants can carry the contrast without a complete renovation.
Before you bring it home
- Tape the island, occupied stools, appliance doors, sink and range landings, dining chairs and every working and passage route.
- Approve the actual travertine with full-size putty, azure, oak, nickel, glass and leather samples under task and evening light.
- Confirm stone sealing and support, ventilation, outlets, pendant suspension, stool height, upholstery care and complete delivery access.
From inspiration to your home
Shop a similar look.
Room imagery is an AI-created styling concept. These are real alternatives, not exact products pictured. Compare finishes, dimensions, current availability, and delivery on the retailer’s page.
Soho Home
Elliot Dining Table, Travertine
A rounded natural-travertine dining table with a sculptural ridged oak base.
The table is 29 H × 87 W × 39 D inches and about 330.7 pounds, with a packaged weight of about 460.8 pounds. Confirm two-box access, floor suitability, assembly and stone care; wipe spills immediately and avoid acidic detergents and abrasives.
The official US page displayed the Elliot listing, active add-to-basket control, delivery from two weeks and size-and-weight access warning on October 30, 2026. Confirm current stock and location-specific delivery.
Why it fitsThe Elliot supplies real natural travertine and a ridged oak base for the adjacent dining zone. It is a dining table rather than the pictured island, so confirm the current dimensions, substantial weight, stone care, floor suitability and complete packaged route instead of expecting an exact image match.
View at Soho HomeCB2
Rake Black Counter Stool by Kravitz Design
A black semi-aniline leather sling on a cantilevered brass-plated steel frame; overall 34.75 H × 18.75 W × 21 D inches.
The Grace Black leather will relax and reveal impressions of the frame over time. Confirm the actual seat height against the finished counter, order a swatch, allow the 21-inch-deep cantilevered base its full footprint and clean the leather periodically with a dry cloth.
The official US page displayed SKU 211973 in Grace Black leather with active add-to-cart and delivery controls on October 29, 2026. Stock and location-specific delivery can change.
Why it fitsThe Rake provides the concept's real black semi-aniline leather sling and brass-plated cantilevered frame. Confirm the actual seat height against the finished counter, allow the 18.75 by 21-inch footprint, order a leather sample and expect the natural sling to relax with use.
View at CB2Visual Comfort
Hicks Small Pendant — Polished Nickel with White Glass
A Thomas O’Brien white-glass globe with polished-nickel metal bands; select SKU TOB 5062PN-WG.
The listed fixture is 13.5 inches high and 8.5 inches wide with a 4.75-inch round canopy, 6-foot chain, E26 socket and dry-location rating. White glass gives a diffused look rather than transparent smoked glass. Verify suspension, bulb and dimmer compatibility.
The official US configurator listed the Polished Nickel/White Glass variant among the active options on October 25, 2026. Confirm finish-level quantity and delivery before ordering.
Why it fitsThe Hicks offers a real polished-nickel and white-glass globe close to the concept's cooler lighting note. Select SKU TOB 5062PN-WG, then confirm the 13.5 by 8.5-inch body, quantity, six-foot chain, canopy, bulb, dimmer, ceiling support and dry-location installation.
View at Visual ComfortProduct sources reviewed October 25, 2026. Selected for design and material relevance; these are not hands-on product reviews.


